Skip to main content

Make your own family signs

Family sign.  Using $5 wood plaques from Michael's
 & Hobby Lobby.  Then spray paint and add a 
$11 vinyl decal.  Less than $20 dollar gift.
Buy the vinyl decal 

Once you get your vinyl and buy and paint your wood sign.
Here are the different sizes I purchased from Michaels

Then pull back the white backing, Leaving the
 vinyl lettering on the tape.

Then Place the vinyl decal as you want it on to the wood.
Run a credit card over the tape a few times 
making the vinyl press onto the wood 

Then peel back the tape slowly making sure the 
vinyl letters come on to wood and off the tape

Lots of different styles.

Whole family name sign

Great housewarming gift or Wedding gift

This sign can be waterproof with some clear 
paint that is used to weather proof decks.

This sign was a gift for a man that had just 
finished building his own garage.

This one I just cut down a piece of wood that was 4ft by
 4 inches.  I cut it down to 21 inches long 

Cute Family sign

Another one that includes all the family names

A smaller 8x9 shaped wood


  1. Very cool idea! I found your post while looking for ideas to make address signs for a new house. Where do you order the custom vinyl lettering?

  2. Really appreciate all the stuff made by this blog to let people know more about this topic. I added little more relevant points to my knowledge which definitely going to help me in coming future. ร้าน สติ๊กเกอร์


Post a Comment

Popular posts from this blog

Master Bedroom Make Over

This is our bedroom (before). We changed out the chandelier when we moved in but we love the painted ceiling and the wall color. But now we want some wall molding done in this area.

We picked a pattern to try using 4ft long by 1.5 inch wide wood. It is in the molding area at Home Depot. We cut the wood into 7, 10, and 13 inch pieces.
Here is the design we wanted. So we could make adjustment we stared in the center of the wall and us one headless nail to nail in each piece of wood. It was easy to pull off and try again if we were off measuring wise.

In this picture you can see how it is a square box of 10wide 13 tall with 7 inch pieces on all sides.
Then we added just a flat 3.5 wide 4 ft long pieces of wood also in the molding department. After everything is in place then take a nail gun and nail all the wood to the wall.
Then really months later we got around to painting it. One coat of primer and 3 coats of white paint. Then we realized that w…

The Love of French Provincial

How I love french provincial furniture painted and restored.

This dresser is the one who started my love affair with this furniture style.

This is my tv stand


Home tour

Yay for Poppies at play

Check out all the lovely homes on the Parade of Homes tour. This became our home as of May 2010

We made a lot of changes in the
                  Three years we have lived here.

                               our message on the front door

These wood art wood is from the Book East of Eden.   It is the hebrew word Tinshel.